If you own or manage a commercial property, a strata complex, or even a home with an irrigation system, there’s a good chance you need regular backflow checks. It’s one of those compliance tasks that doesn’t get much attention until something goes wrong, but it plays a big role in keeping drinking water safe for everyone on your street, not just your property.
This guide breaks down what backflow checks involve, what types of devices exist, how testing works, what it costs, and how to stay on top of your legal obligations. Whether you’re in Perth, Sydney, Melbourne, or regional Australia, the core requirements come back to the same national standard, so we’ve kept things broad enough to be useful no matter where you are.If you already know you need a test and just want it sorted, our backflow testing and certification service covers everything from the test itself to the compliance paperwork.
What Is Backflow and Why Does It Matter?
Backflow is when water in your plumbing system flows in the wrong direction. Instead of moving from the mains supply into your property, it reverses and pushes water from your property back toward the public water network. That’s a problem because the water flowing backward can carry contaminants — anything from fertiliser and pesticides to cleaning chemicals, bacteria, or industrial waste.
There are two main ways backflow happens. The first is back siphonage, which occurs when pressure in the mains drops suddenly. A burst water main, a fire hydrant being used nearby, or heavy demand during peak periods can all cause this. When the pressure drops, it creates a vacuum effect that can suck water from your property back into the street supply.
The second is back pressure. This happens when the pressure on your side of the meter is higher than the mains pressure. Pumps, boilers, and elevated storage tanks can all create this kind of pressure imbalance.
A common example that makes the risk easy to understand: imagine a garden hose left sitting in a bucket of soapy water or a swimming pool. If the mains pressure drops while that hose is submerged, the contaminated water can be siphoned back through the hose, into your internal plumbing, and potentially into the public supply. That’s exactly the kind of scenario backflow prevention devices are designed to stop.
Types of Backflow Prevention Devices

Not all backflow devices are the same. The type you need depends on the level of risk your property presents to the water supply. In Australia, these risk levels are defined by AS/NZS 3500, the national plumbing and drainage standard, and your local water authority will assess which category your property falls into.
Here’s a comparison of the most common device types used in Australian plumbing systems.
| Device | Hazard Rating | How It Works | Common Applications | Testable? |
| Air gap | All levels | Physical separation between water outlet and contamination source | Sinks, basins, tanks with overflow | No |
| Dual check valve | Low | Two non-return valves in series, no test ports | Residential water meters, low-risk connections | No |
| Hose tap vacuum breaker | Low | Prevents back siphonage through garden hoses | Outdoor taps, hose connections | No |
| Double check valve assembly (DCVA) | Medium | Two independently operating, spring-loaded check valves with test ports | Fire services, irrigation, commercial buildings | Yes |
| Reduced pressure zone device (RPZD) | High | Two check valves with a pressure-monitored relief valve between them | Chemical plants, medical facilities, high-risk industrial sites | Yes |
| Registered break tank | High | Complete physical break in the water supply via a storage tank | Highest-risk applications | No (inspected) |
The key distinction is between testable and non-testable devices. Non-testable devices like dual check valves and air gaps are fitted at the point of use and don’t require annual testing. Testable devices like DCVAs and RPZDs are installed at the property boundary or on specific supply lines and must be tested regularly by a licensed plumber.
If your property needs a new device installed or an existing one upgraded, our backflow prevention installation team can assess your site, confirm the right device for your risk rating, and handle the full install.
What Happens During a Backflow Check?
A backflow check is a performance test carried out by a licensed plumber who holds backflow testing accreditation. The goal is to confirm that your device still functions correctly under pressure and provides the level of protection your property’s risk rating requires.
Here’s what typically happens during a standard test. The plumber starts with a visual inspection of the device, looking for obvious damage, corrosion, leaks, or signs of wear. They then connect a calibrated differential pressure test kit to the test ports on the device.
For a double check valve assembly, the plumber tests each check valve independently to confirm it closes at the correct pressure and holds a tight seal. For a reduced pressure zone device, the plumber also checks that the relief valve opens when it should (if pressure in the zone rises above the safe threshold) and reseals properly afterward.
All readings are recorded and compared against the manufacturer’s specifications and the requirements set out in AS/NZS 3500. If the device passes, the plumber completes a compliance report and submits it to the relevant water authority. If it fails, the plumber will explain what needs repairing or replacing before a retest can be done.
The whole process usually takes 20 to 40 minutes per device, depending on the type, location, and access.
Is Backflow Testing a Legal Requirement in Australia?
Yes. Across Australia, backflow prevention is governed by AS/NZS 3500.1 (Plumbing and Drainage, Part 1: Water Services). This national standard sets out when backflow devices must be installed, what type of device is appropriate for each risk level, and how often testable devices need to be checked.
On top of the national standard, each state and territory has its own plumbing regulations and water authority requirements that determine how compliance is enforced locally. In Western Australia, the Water Corporation manages backflow compliance for properties connected to scheme water. In New South Wales, Sydney Water oversees it. In Victoria, it falls under local water retailers. The specifics vary, but the underlying principle is the same everywhere: if your property has a testable backflow device, it must be tested at commissioning, after any repairs, and then at regular intervals, usually every 12 months.
Property owners are generally responsible for ensuring compliance, even if the property is tenanted or managed by a strata company. Failure to test or maintain devices can lead to non-compliance notices, fines, and in serious cases, restrictions on your water supply.
For commercial sites, compliance also supports insurance requirements, health inspections, and due diligence obligations. Cafes, medical facilities, childcare centres, and industrial sites all rely on being able to demonstrate that their water safety obligations are being met.
Do Residential Properties Need Backflow Checks?
This is a common question, and the answer depends on your property setup. Most standard residential homes connected to the public water supply have a non-testable dual check valve built into the water meter. This provides basic protection and doesn’t require annual testing.
However, you may need a testable backflow device if your home has an irrigation system connected to the mains supply (especially if it uses fertiliser injectors or chemical dosing), a swimming pool with a direct plumbing connection, a bore pump or rainwater tank connected to the mains via a mixing valve, or a fire sprinkler system.
If your water authority identifies your property as medium or high risk during a hazard assessment, they’ll issue a notice requiring the appropriate device to be installed and tested. This is becoming more common as water authorities across Australia expand their backflow auditing programs.
If you’re not sure whether your home needs a testable device, a plumbing inspection can confirm your risk rating and what’s required.
How Do You Know If Your Backflow Device Is Failing?
Backflow devices are mechanical, which means they wear out over time. Most testable devices last somewhere between 5 and 25 years depending on water quality, usage, and how well they’re maintained. But problems can develop between annual tests, so it’s worth knowing the warning signs.
Visible leaks around the device body, fittings, or relief valve are the most obvious sign. Even a small drip can indicate worn seals or a damaged check valve that needs replacing.
Frequent cycling of the relief valve on an RPZD, where the valve opens and closes more often than normal, suggests something inside isn’t holding pressure properly. You might hear it or notice water discharging from the relief port intermittently.
A noticeable drop in water pressure inside the building can sometimes point to a partially failed check valve or a blockage within the device.
Rust or corrosion on the valve body, test ports, or isolation valves is a sign of deterioration that could compromise the device’s ability to seal correctly.
If you notice any of these, don’t wait for the annual test. Get a licensed plumber to inspect the device sooner rather than later. Catching a problem early usually means a simple repair rather than a full replacement.
How Much Do Backflow Checks Cost?
Pricing varies depending on your location, the number of devices on site, the type of device, and how easy it is to access. As a general guide, here’s what you can expect.
| Site Type | No. of Devices | Typical Cost Range | Notes |
| Small shop or cafe | 1 | $80 to $200 | Single testable device at the boundary |
| Medium commercial or strata | 2 to 5 | $150 to $500+ | May include multi-storey pipework or multiple supply lines |
| Large commercial or industrial | 6+ | Quoted per site | Complex layouts, shutdowns, and access considerations |
These are indicative ranges. Prices can sit higher for difficult-to-access devices, RPZDs (which take longer to test than DCVAs), or sites that require water shutdowns to be coordinated. Any repairs or replacement parts are usually charged separately.
To keep costs down, book all devices on site for the same visit, make sure the plumber knows how many devices to expect beforehand, and ask for a quote that includes the test report and lodgement with your water authority, not just time on site.
How to Maintain Your Backflow Prevention Devices
Annual testing is the formal compliance requirement, but good maintenance between tests helps extend device life and reduces the chance of a failed result when the tester shows up.
Keep the area around the device clear of vegetation, debris, and stored materials. The plumber needs physical access to connect the test kit, and obstructed devices take longer to test, which costs more.

Check the device visually every few months for leaks, corrosion, or damage. You don’t need to be a plumber to spot a drip or a patch of rust.
If the device has isolation valves, make sure they still turn freely. Valves that seize up from lack of use can complicate testing and repairs.
For RPZDs, keep the relief valve drain clear. If the drain line is blocked or submerged, the relief valve can’t discharge properly, which defeats the purpose of the device.
If your property has multiple plumbing systems or complex water infrastructure, regular plumbing maintenance visits can catch backflow issues alongside other general plumbing checks.
For strata complexes with shared water infrastructure, a strata plumbing maintenance plan that includes backflow testing keeps everything centralised and ensures nothing gets missed across multiple lots.
What Happens If You Don’t Comply?
Ignoring backflow compliance isn’t just a paperwork issue. There are real consequences.
Water authorities across Australia actively audit properties for backflow compliance. If your device hasn’t been tested within the required timeframe, you’ll typically receive a non-compliance notice with a deadline to get the test done. If you still don’t act, penalties escalate. These can include formal warnings, fines, and in the most serious cases, restrictions on or disconnection of your water supply.
Beyond the regulatory side, there are practical risks. An untested or failed device means your property’s drinking water isn’t properly protected. If a backflow event does occur, contaminants from your site could enter the public water network and affect other properties in the area. That creates liability, potential health consequences, and serious reputational damage for businesses.
For commercial properties, non-compliance can also trigger problems during insurance claims, health department inspections, and building compliance audits. It’s one of those things that’s cheap and simple to stay on top of, but expensive to deal with if you let it slide.
Who Needs a Backflow Device? A Quick Checklist
If you’re not sure whether your property requires a testable backflow device, run through this list. If you answer yes to any of these, you almost certainly need at least one device and a regular testing schedule.
Do you run a commercial, industrial, healthcare, food service, or multi-residential site? Do you store or use chemicals, fertilisers, fuels, or other hazardous products that connect to your plumbing in any way? Do you have an irrigation system connected to the mains supply? Do you have fire services (hydrants or sprinklers) connected to scheme water? Do you have a bore pump, rainwater tank, or any alternative water source connected to or near your mains plumbing?
If you answered yes, the next step is straightforward. Get a licensed backflow plumber to inspect your site, identify any existing devices, confirm your risk rating, and either test what’s there or recommend what needs to be installed. From there, set up an annual reminder or service agreement so testing doesn’t fall through the cracks.
For properties across Perth, our team at VTPG handles the full process, from site assessment and device installation through to annual testing, certification, and submission to the water authority. We service homes and businesses across the northern suburbs including Morley and surrounding areas.
Key Takeaways
Backflow checks are annual performance tests on testable backflow prevention devices, carried out by licensed plumbers to confirm the device is working correctly and your property is compliant.
The type of device you need depends on your property’s risk rating, which is determined by your water authority based on the potential for contamination. Low-risk properties get simple non-testable valves, while medium and high-risk sites need testable DCVAs or RPZDs.
Backflow testing is a legal requirement across Australia under AS/NZS 3500, with enforcement handled by state and local water authorities. Property owners are responsible for ensuring their devices are installed, maintained, and tested on schedule.
Most residential properties only need a basic non-testable device at the meter, but homes with irrigation, pools, bore pumps, or fire systems may need testable devices and annual checks.
Costs are generally modest for single-device sites but scale with complexity. Grouping all devices into one testing visit and maintaining clear access helps keep costs down.
Staying compliant protects public health, avoids fines and supply restrictions, and supports your business’s insurance, health, and building compliance requirements.



